N No7Sorry, you may only log on to one line at any one time!2Your name was not located in the system user file.
Name entered: "Did you enter your name correctlyY
Sorry, this system is private.1Sorry, that name is not acceptable on this system(Would you like ANSI colour and graphicsY/Do you want to use the ANSI full-screen editorY'Would you like AVATAR codes to be sentN
Would you like hot-keyed menusY#Use the full screen message viewerY9How many lines does your display have (10-66, Enter=24): /Would you like to pause after each screen pageY-Do you want screen clearing codes to be sentY
Where are you calling from? *Please enter your home/voice phone number:-Please enter your business/data phone number:&Enter your handle (RETURN for none) : DThat name is already being used by another user, or is unacceptable.
Please enter your date of birth%You must enter a valid date of birth!
Enter your password to use: "Please re-enter for verification:
Passwords do not match!2Did you enter all the above information correctlyY.Scanning phone numbers, please wait a moment..BWARNING: Unacceptable voice phone number entered, notifying sysop.?WARNING: Duplicate voice phone number entered, notifying sysop.4Sorry, but you cannot use this system at this speed.>Sorry, 300 baud callers are not permitted to call at this time+** Sysop Remote Access has been disabled **
Incorrect, try again.
Access denied!
Leave a message to the sysopYFSorry, but your access to this system has been suspended by the sysop.
System event in$your time limit has been adjusted to
minutes
Check for waiting mailY
Check for new filesN"Your current password has expired!EFor security purposes, you are required to change your password every
times you call%File to move/copy (wildcards valid): ,You can't use the same password! Try again..#Your password must contain at least
characters
not found!
Full destination path: #Can't copy a file on top of itself!
Error opening source file..
Unable to create target file..
Error occurred during copy.. Would you like a return receiptN
K (K)eyword in text"Invalid choice, please try again: "Please enter a number in the range
Password:
Number:
Number entered:
Is this correctY7Sorry, daily time limit exceeded -- call back tomorrow.
WARNING -- Time remaining:** User Inactivity Timeout, Disconnecting *0You are about to be disconnected for inactivity!
YN= More(Y/n/=)?
Sysop breaking in for a chat:
No user on-line!
Sysop chat mode ended
Please wait a moment..
Thanks for waiting.
** LOCKING OUT USER ** ** SECURITY LOCK-OUT COMPLETE ** Top menu missing, disconnecting.
ERROR - Menu missing: System contains messages ranging#Enter number of message to delete:
There is no message number
in this area
Deleting message #
You cannot delete that message.>Sorry, you do not have sufficient credit for this destination.
Could not find nodeH? to list zones, z:? to list nets in zone z, n/? to list nodes in net n.
Available zonesN Number Name Location Cost
Nets/regions in zone
Nodes in
Sorry, there is no
listed3Sorry, nodelist help is not available at this time.
Region
Node'Choose a user (enter the line number): &Sorry, there isn't anyone on that line
doesn't wish to be disturbed.
Sysop Override : Send anywayY
Message to
Aborted.
Processing...
Message sent/Sorry, but you may only page for a chat between#Sorry, you may only page for a chat
times per call.*Why would you like to chat with the sysop?0Sorry, but the sysop is not currently available.ASorry, this password is unacceptable. Please try something else..DYou must select a password that is less similar to your current one!ISDQ Would you like to (S)elect, (D)e-Select all message areas or (Q)uit? /Verify that you would like to make this changeN
Attach local filesYGEnter full path and file names to send, 1 per line (blank line to end):
File:
Sent:
Could not find!Enter message area(s) to toggle:
Data file not present
File to view (Enter=quit): )Cannot locate any files for this message!
Files attached to this message:
Directory to move files to:
Moving files..FCheck that you have all the files safely. Okay to kill the files hereN
Killing the attached files..
AVATAR codes now active
AVATAR codes will NOT be used
Todays Callers toEName Line BaudRate LogOn LogOff Times Location
Quiet mode2Sorry, but the full screen editor is not installedFWARNING! The full screen editor requires that you have ANSI capability=The full screen message editor will be used to enter messages.The line editor will be used to enter messages4Sorry, ANSI graphics are not available at this speed
ANSI/Colour graphics now active%ANSI/Colour graphics will NOT be used
Screen clear codes WILL be sent#Screen clear codes will NOT be sent
Midnight
Line%Percentage of hourly system usage for7Enter Username search string or (Enter) for all users: MName Location LastOn Calls Ratio$is not a listed user of this system.!Enter new user security-level for
File to view: "Sorry, couldn't locate that file..
Callers On-Line toBName Line BaudRate Status Location
Browsing File Xfer
Messages
Sysop Chat
Quest'naire
Free :
bytes
Using: /There is not enough free space for your upload!;Start sending now, or press <Ctrl-X> several times to abort
File to upload: 'Sorry, but you may not upload that file%Sorry, that file already exists here.
Files Received
File Received
No Files Received
You have been granted an extraNNOTE - One or more of your files was rejected because they already exist here.LNOTE - One or more of your files was rejected because they are unacceptable.:Begin description with a "/" if file is for the sysop only
Please describe5Sorry, file transfers are not permitted at this speed
File(s) to download: JSorry, but the protocol you have selected does not support batch transfers
daily time limit*Sorry, but this download would exceed your
k daily limit
ratio limitISLNA (S)tart transfer, (L)ogoff after transfer, (N)ew protocol, (A)bort:
Files:
Size :
Time :
minutes at
BPS=Start receiving now, or press <Ctrl-X> several times to abort
Files sent File sent
No files sentNAuto logoff in ten seconds: Press "!" to disconnect now, "S" to stop countdown&File to download (full path & name) :
No files to send!LSorry, only the first six listed protocols are available for message upload.
One moment..&(*) indicates batch transfer available
Protocol (Enter=quit):
(Free) Incorrect
Accepted)Sorry, downloads are only allowed between)* NODELIST BROWSING * (blank line quits):
? to list all zones
z:? to list nets in zone z
n/? to list nodes in net n
Password change successful
characters! Try again...You must enter both your first and last names!
Screen length changed to
File Areas:
Message Areas:
That area does not exist!
Combined,File name pattern match (Enter=all files) :
File Name Size Date
files
Select area: !Enter keyword to use for search:
File Search by Keyword;
Press P to Pause, S to Stop*Search Config File not installed, aborting/Enter the file name to find (wildcards valid):
File Search by Name;
Archive to view:
Unknown archive type!
Listing of archive4Filename Original Size Ratio Date Time
MISSING*Search for files new since your last callY
Show all files newer than
File Search by Date;
Sunday
Monday
Tuesday Wednesday
Thursday
Friday
Saturday
Press (Enter) to continue:
Checking your mail-box ... &You have no new mail in your mail-box.
You have the following mail:
message
messages
R Read
S Scan mail
Q Quickscan mail
K Killing mail..
M Marking as received..
Help&Would you like to read this mail now? 8Are you sure you wish to kill all mail addressed to youN
There is no message text!
Delete starting at line #
Delete ending at line #
Enter line # to edit
Maximum length exceeded!&Enter line # to insert new text before
Enter line # to adjust
Line currently reads:
Text to replace :
Replacement text:
Line now reads:KBegin your message now. Words are wrapped automatically, blank line to end.
Maximum of
lines
characters per line
Functions available:
lines in text
D Delete
E Edit line R Replace
I Insert
H Help
C Continue
L List text
S Save
Q Quit
Select:
Are you sureN
Send files with this messageN
Saving message to disk.. Subject:
Enter the name to use :
Verifying user ... "You can't use another user's name!$You can't use that name, try another To : >That is not a valid user of this system. Browse the user-listY<You can't post a message to SYSOP in an EchoMail conference! Address:
Area to forward message in:
Area to post message in:
Reply via personal NetMailN4You are not permitted to post messages in this area.
Forwarding message from
Replying to message in
Posting message in
Scanning user-file ...
Use an aliasN From :
Change anythingN3SA (S)ubject, or (A)bort message, (Enter)=Nothing:
T (T)o name,
What do you want to change?
To name
Subject name
Abort
PrivateN)Delete message after sent to destinationY#Send message with 'crash' priorityN
Attach files with messageN
File(s) to attach: !Quote text from original messageN
Quoting reply text ...
Upload a prepared messageN
Message aborted.!Message larger than 20k, aborted.+Error in executing external message editor.
Inactivity time-out. (Deleted)
(Pvt)
(Rcvd)
(Attach)
(Kill/Sent)
(Sent)
(Crash)
(ReqRec)
(Audit Req)
(RetRec) From: To: DThere are files attached to this message; Press (F) to download them
Enclosed: Replies:
Re: ?# From To Subject
Message area
contains
Enter message number to read: 5Enter message number to start at (Enter=First/Last):
Pause after each messageY Mark messages for later readingY Clear currently marked messagesY"Mark this message? (yes/No/stop):
End of messages
End of new mail"There are no messages in this area1You do not have read access to this message area.#Device/filename to export file to:
Cannot create file!
Exporting.. Date:
Local
NetMail
EchoMail
Toggle message attributes:
Select attribute to toggle: (NetMail)
(Local)
SYSOP Message Adjustment Menu
New message area: #
.. Area no. :
.. From :
.. To :
.. Subject :
.. Attributes :
.. Exported :
.. Ext Attrib :
X .. Save and exit
Q .. Quit (without saving)
... Kill/sent :
... Exported :
... File-attach :
... Crash :
... Req receipt :
... Audit req :
... Ret receipt :
... Deleted :
... Netmail :
... Private :
... Received :
... Local : $Please enter your current password: A (A)gain
N (N)ext
L (L)ast R (R)eply E (E)nter
S (S)top
D (D)elete F (F)iles
Read Replies
Read Reply
Again
Delete
Reply
Enter
Kludge toggle Unreceive
Usrsec
Export
Forward
S Stop
F (F)orward
R (R)everse
I (I)ndividual
H (H)elp
M (M)arked
N (N)ew msgs
S (S)elected
Reverse
Individual
Marked
New messages
Q (Q)uit
Selected read)Read messages according to what criteria:
F (F)rom name
T (T)o name
S (S)ubject
Enter 'To' search-string: From name
Enter 'From' search-string:
Subject
Enter subject search-string:
Loading, one moment..*Error in archive or unknown archive format3You do not have download access for this file area!%File is already attached. Replace itY
DD-MM-YY
MM-DD-YY
YY-MM-DD DD-Mmm-YY
Available date formats:1You do not have upload access for this file area!>ANSI graphics are required for the full screen editor. Use itN%Automatic message forwarding disabled$Automatic message forwarding enabled-User not found. Try again, or (Enter) to quit&Nominate a user to receive your mail: 6This message has files attached. Forward them as wellY
Nobody
Local upload.
That file already exists here!
That file may not be uploaded./archive contains encrypted files, or a comment.
Local download.
Could not copy
on node
***MESSAGE*** from:Invalid date. Please make sure you use the correct format.AThis conference is read-only - you may only use netmail to reply.MOriginal message does not contain sufficient information for a netmail reply.
Message-base is in use. RetryY
DeleteN
Deleted*Show extended information (N=normal list)N1Name Private Moderator Description
Name : password=
requires password
Private :
Moderator :
Parent :
Language :
Nodes :
Description : +Users currently participating in conference
(Read Only)
(read-only access)
start typing to send a message!This conference no longer exists!DYour access to this conference has been terminated by the moderator.
has entered the conference.
Conference
ESCAPE or CTRL-X for help moderator'Sorry, help is not currently available.
No active conferences.
Returning to
Change moderator to:
Remove which user: $That user is not in this conference!-You only have read access to this conference!
Request to join conference from
AuthoriseY
Read-onlyNEThis conference has been terminated by the system operator/moderator.
has left the conference.
Create a real-time conference.
Conference name: /Conference already exists, select another name.<You may not use that conference name, please choose another.@Allow access to this conference from the global conference listY
Description : %Private (require permission to join)N4Unlisted (do not display in global conference list)N1Permanent (keep active after last user has left)N
Moderator:
Language :
Password (Enter=none):
Join the conference nowY
Created conference#You are already in that conference! You cannot join that conference!7The moderator is unavailable at the moment, try later..2Requesting permission to join from the moderator..<The moderator has not yet responded, please try again later.-Sorry, the moderator has denied your request."You cannot delete that conference!
N (N)otify (message to user)
W (W)ho else in this conference
S (S)pawn sub-conference
L (L)ist accessible conferences
J (J)oin another conference
M (M)oderator change
R (R)emove a user
Q (Q)uit this conference
Select (Enter=quit): "Is this a Handles-only conferenceN
No tagged files!)Tagged file list (P to Pause, S to Stop):?ADC (A)dd, (D)elete or (C)lear all entries (Enter to continue):
Delete: -TVE (Enter) to continue, (T)ag/(V)iew/(E)dit:$There are currently no tagged files.#YNQ Add to tag list (Yes/No/Quit):
files added.
is already tagged.
Clear tag listN
Validate file passwords:
Download file descriptionsY
is not available for download.
credit limit!
Cost: +is locked, and may not be moved or deleted.>MCDESQ (M)ove, (C)opy, (D)elete, (E)dit desc, (S)kip, (Q)uit:
File-base is in use. RetryY
Password-protect this fileN"already exists in the target area!,One moment, transferring files from CD-ROM../DC (D)elete or (C)lear all (Enter to continue):(has just posted a message to you in area
Default protocol: -Select your preferred file transfer protocol:/SNA (S)tart transfer, (N)ew protocol, (A)bort: *Echomail in a mailbox scan will be ignored,Echomail in a mailbox scan will be displayed
Scan your uploads nowY$Please wait, scanning your uploads..
Passed.
Failed virus check.(One moment, fetching file descriptions.."Send carbon copies to other usersN
File is a GIF:
colours.6Sorry, but as a GUEST you may not change this setting.
Continue the searchN
Invalid group number!
File groups:
Select group:
Unable to access file: "Show EchoMail in a mail-box checkY
Keyword"Enter message text search string:
Unknown
Female)MF What is your sex? (M)ale or (F)emale: ,Please enter your mailing address (3 lines):
Message groups:)No mailing address information on record!*Your mailing address is listed as follows:
Change your mailing addressN
Original
Enter thread
Internet NewsgroupJSorry, this file is not currently available for viewing. Please try later.)Mailbox scan will check ALL message areas+Mailbox scan will check ONLY SELECTED areas1That is not a valid Internet address. Try again..)You have files tagged! Disconnect anywayN Scanning messages, please wait..%You are currently in teleconference: 6Press ESC or CTRL-X for help, or start typing to chat.=Time limit for your current session is up! Please call back..U
KEnter-Edit Esc-Exit ALT: C-Change colour D-Copy default F-Find I-InfoM U
B*BFBbB~B
C&CBC^CzC
D"D>DZDvD
E:EVErE
F6FRFnF
G2GNGjG
H.HJHfH
I*IFIbI~I
J&JBJ^JzJ
K"K>KZKvK
L:LVLrL
M6MRMnM
N2NNNjN
O.OJOfO
P*PFPbP~P
Q&QBQ^QzQ
R"R>RZRvR
S:SVSrS
T6TRTnT
U2UNUjU
V.VJVfV
W*WFWbW~W
X&XBX^XzX
Y"Y>YZYvY
Z:ZVZrZ
[6[R[n[
\2\N\j\
].]J]f]
^*^F^b^~^
_&_B_^_z_
`"`>`Z`v`
a:aVara
b6bRbnb
c2cNcjc
d.dJdfd
e*eFebe~e
f&fBf^fzf
g"g>gZgvg
h:hVhrh
i6iRini
j2jNjjj
k.kJkfk
l*lFlbl~l
m&mBm^mzm
n"n>nZnvn
o:oVoro
p6pRpnp
q2qNqjq
r.rJrfr
s*sFsbs~s
t&tBt^tzt
u"u>uZuvu
v:vVvrv
w6wRwnw
x2xNxjx
y.yJyfy
z*zFzbz~z
{&{B{^{z{
|"|>|Z|v|
}:}V}r}
~6~R~n~
00:00
24:00
\RA\MENUS\
\RA\TXTFILES\
RA.LOG
RemoteAccess BBS
Default Origin Line
SysOp
Please enter your full name: '* In a message originally to @, # said:
ATH0S0=0M0|
ATH1|
CONNECT|
CONNECT 1200
CONNECT 2400
CONNECT 4800
CONNECT 9600
CONNECT 19200
CONNECT 38400
CONNECT 7200
CONNECT 12000
CONNECT 14400
CONNECT 16800
CONNECT FAX
CONNECT 21600
CONNECT 24000
CONNECT 26400
CONNECT 28800
CONNECT 57600
CONNECT 64000
[0E%
[0D#
[0A@`
Available languages:
* Select your preferred language:
CONNECT 31200
CONNECT 33600U
00:00
01-01-80
03:00U
[Unused]
Not available
Available
Error free U
Internal protocols 9Always available, not available, error-free connects only
Xmodem
Xmodem/1K
Xmodem/1K-g
Ymodem
Ymodem-g
Zmodem U
External protocol
Name
Name of this protocol
Key %Hotkey to activate from protocol menu
Ext ctl file ?Does the protocol support the standard protocol interface file?
Batch *Does the protocol support batch transfers?
Not available
Always available
Error free
Status ?Available, not available, available on error-free connects only
Log file 7Full path and name of the log file this protocol writes
Control file :Full path and name of the control file this protocol reads
DL command line 6DOS command-line to activate protocol in download mode
UL command line 4DOS command-line to activate protocol in upload mode
DL ctl string 9Format (in the control file) of a download filename entry
UL ctl string 8Format (in the control file) of an upload filename entry
DL log keyword CKeyword to look for in the log file which indicates a file download
UL log keyword AKeyword to look for in the log file which indicates a file upload
Log name word
<Offset (word number) of the filename, from the UL/DL keyword
Log desc word ?Offset (word number) of the description, from the UL/DL keywordU
PROTOCOL.RA
Select a protocol U
Protocols
Internal#Edit internal protocol availability
External
Edit external protocol settingsU
TRASHCAN
NODECOST
BADFILES
HANDLES
PHONENUM
PWDTRASH
NAMES
OtherU
Ctl files 0Notify the sysop when any of these users call in
Disallow certain user names(Nodelist and netmail costing information Specify a list of unwanted files
Disallow certain handle names?Disallow certain telephone numbers or telephone number segments
Disallow undesirable passwordsASpecify a list of shortname macros for frequently-addressed users2Edit an ASCII text file (you supply the file name)
Edit text file 2Enter the full path and name of the file to edit
.CTLU
Days .Space-Toggle whether event is active, Esc-quit
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday U
Event #
Start
Start time of the event
Deleted
Enabled
Disabled
Status
Enabled, disabled or deleted
Errorlevel ,Errorlevel to exit at when event is executed
Forced JYes means that file transfers will be interrupted to ensure the event runs
Days Days that this event will run onU
00:00U
EVENTS.RA
Events > Event # Time Status Errorlevel Forced Days:SMTWTFS
Enabled
Disabled
Yes
No
U
1 F V ` n
!0!I!b!r!|!
"*"="M"l"z"
#-#=#\#j#}#
$L$\$f$p$~$
%O%r%
'X'{'
(0(e(
)8)m)
*8*L*}*
+@+J+|+
+C,m,{,
- -3-T-b-h-
.1.K.e.
1$121B1G1X1
202C2V2i2
3$3<3Z3h3r3
5+5[5x5
6*686H6R6`6
7*7:7D7R7
8,868D8z8
9(9q:
;8;H;b;p;
<&<4<G<{<
=&=9=S=y=~=
>F?T?Z?p?
A=ATA
BOBeBoByB
CJCgC
D D=DGDQDlD
E"E?EIESE]ExE
F3FKFUFZFnF
Never
Weekly
Monthly
Yearly U
Edit Security
Security level for this entry Time
Daily time limit 300
Download limit (k) for 300 bps 1200
Download limit (k) for 1200 bps 2400
Download limit (k) for 2400 bps 4800
Download limit (k) for 4800 bps 7200
Download limit (k) for 7200 bps 9600
Download limit (k) for 9600 bps 12000 Download limit (k) for 12000 bps 14400 Download limit (k) for 14400 bps 16800 Download limit (k) for 16800 bps 19200 Download limit (k) for 19200 bps 21600 Download limit (k) for 21600 bps 24000 Download limit (k) for 24000 bps 26400 Download limit (k) for 26400 bps 28800 Download limit (k) for 28800 bps 31200 Download limit (k) for 31200 bps 33600 Download limit (k) for 33600 bps 38400 Download limit (k) for 38400 bps 57600 Download limit (k) for 57600 bps 64000 Download limit (k) for 64000 bps Local &Download limit (k) for a local session RatioNum &Download ratio limit (number of files) RatioK
Download ratio limit (k) PerMin -Per minute logon cost (deducted from credits) FlexTime 8Credits to deduct per minute after timelimit is exceeded Session *Maximum time limit PER SESSION (0=Disable) Reset
How often to reset credits ResetOfs 2When to reset credits in above period (day number) ResetAmt (Credit amount to adjust users account by
LIMITS.RA
Select a security level 3 Level Time 1200 2400 9600 14400 16800 R# RK
4 _ m {
- H Y U
6 Y[+
Messages to operator
General public messages
Members onlyU
General files
GENFILESU
+ERROR: Area/Group number is already in use!U
IDX\FDB
HDR\FDB
TXT\FDB
.TXTU
4Unable to rename FDB; Area number is already in use!U
Local
Imail
[Unused]
FGROUPS.RA
[Unused]
[Unused]
[Unused]
Addresses
Select an alias (AKA) addressU
Template for global changes
Message area
(F1) to edit area number
Name
Name of this message area
Origin !Origin line for this message area
Read security
A flag
B flag
C flag
D flag ASecurity and flag settings required to read messages in this area
Write security BSecurity and flag settings required to write messages in this area
Sysop security GSecurity and flag settings required to perform maintenance on this area Local Netmail Echomail Internet Newsgroup
Type /Local, EchoMail, NetMail, Internet or Newsgroup Pvt/Pub Private Public Read-only No-reply
Status ?Private/public, private only, public only or read-only messages
Pick an alias
Handles only
Real names only
Users >User names - Real names only, handles only or ask for an alias
Days old
#Number of days to keep old messages
Days rcvd (Number of days to keep received messages
Max msgs "Maximum number of messages to keep
Echoinfo +Append an origin line to outbound messages?
Combined ,Permit combined access to this message area?
Attaches )Permit users to attach files to messages?
SoftCRs 0Treat SoftCRs as normal characters in this area?
Deletes -Permit users to delete messages in this area?
AKA
@Alias (AKA) address to append to the origin line (EchoMail only)
Age
(Minimum age required to access this area
Group %Primary message group this area is in
JAM
Hudson
Area type
Area type (JAM or Hudson)
JAMbase 'Full path and base filename of JAM area5Board 7Hudson message board number (1-200); Press (F1) to edit
AltGroup1 *Secondary group to which this area belongs
AltGroup2
AltGroup3
AllGroups /"Yes" means this area will appear in all groups
NetReply 9Area in which to post netmail replies (0=first available)
Message area U
Z<%u2
$<&u
One moment, re-indexing..
LINKBUF.RA
LINKNEW.RA
6 Y[+
Working.. U
PSelect move/copy insertion point U
MESSAGES.RA
Message areas KEnter-Edit Space-Tag (INS)ert (DEL)ete (Alt-C)opy (Alt-M)ove (Alt-G)lobal
Confirm delete (y/n) ?
Apply changes (y/n) ?
MESSAGES.RA
Toggle combined default U
Archivers
:Select an archive format; ENTER to accept, ESCAPE to clearU
'Kill the file database as well (y/n) ?
IDX\FDB
HDR\FDB
TXT\FDB
.TXTU
Template for global changes
File area
(F1) to edit area number Name
Name of this file area Path 'Full path to where the files are stored
DL security
A flag
B flag
C flag
D flag >Security and flag settings required to download from this area
List security >Security and flag settings required to list files in this area
UL security BSecurity and flag settings required to upload files into this area
No New 'Include this area in a new files check? Dupes &Check this area for upload duplicates? CD-ROM
Is this area on a CD-ROM drive? Free +"Yes" means all files in this area are FREE LongDesc :Permit users to enter multi-line upload file descriptions? DirectDL 8Permit users to download files not in the file database? PwdUL <Permit users to password-protect their uploads to this area? UL scan
/Check uploads for corrupt archives and viruses? ArcType
ArcType $Archive format to convert uploads to DL days
0Number of days to keep files since last download FD days .Number of days to keep files based on filedate MoveArea 'Area to move old files to (0=kill file) Min age 'Minimum age required for list/DL access Password OPassword required to download files (does not override individual file setting) Group #Primary group which this area is in Def.cost
Default cost for all files Uploads
Alternate upload area
AltGroup1 *Secondary group to which this area belongs
AltGroup2
AltGroup3
Device -Fixed-media device on which this area resides
AllGroups /"Yes" means this area will appear in all groups
File area F U
Y<&u$
1<'u-
One moment, re-indexing..
LINKBUF.RA
LINKNEW.RA
6 Y[+
Working.. U
PSelect move/copy insertion point U
FILES.RA
File areas KEnter-Edit Space-Tag (INS)ert (DEL)ete (Alt-C)opy (Alt-M)ove (Alt-G)lobal
Confirm delete (y/n) ?
Apply changes (y/n) ?
Template for global changes
Group
(F1) to edit group number Name
Name of this group Security
A flag
B flag
C flag
D flag 8Security and flag settings required to select this group
ERROR : Check your menu path in RACONFIG and make sure it exists!U
Save Menu
(menu has been modified)
Press [Esc] to abort.
Name of menu to save:
.MNUU
< Any key to return >
* Automatic
Any
ANSI
RIP U
Select
ANSI
AVT
RIP &Press SPACE or ENTER to toggle settingU
D (SPACE) tag, (ALT-U/T) un/tag all, (ENTER) or (ESCAPE) to continue U
Select day/time
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday ,Time period during which option is availableU
Edit Menu Item
K 1 2 3 4 5 6 7 K123456789012345678901234567890123456789012345678901234567890123456789012345
Colour example Action
(Type
)&What will happen when item is selected Display 8Text which is displayed for this option before selection OptData
Optional data HotKey
Key to activate this option AutoExec ;"Yes" means that this option will be automatically executed Colour "Colour used to display this option MinSec
7Minimum security level required to activate this option MaxSec >Maximum security level allowed to activate this option (0=any) A flags 0A flags setting required to activate this option B flags 0B flags setting required to activate this option C flags 0C flags setting required to activate this option D flags 0D flags setting required to activate this option TimeUsed JMinimum amount of time limit that must be used before option is selectable TimeLeft :Minimum amount of time left required to select this option Age
$Minimum age required for this option MinSpeed
=Minimum connect speed required to make this option selectable MaxSpeed DMaximum connect speed allowed to make this option selectable (0=any) Credit BCredit required to select this option, 0=don't care (not deducted) FlatCost ?Number of credits deducted from account when option is selected TimeCost LNumber of credits deducted from account per minute until menu is redisplayed Terminal GUser must have ONE OR MORE of these emulations enabled to select option Nodes 'Nodes on which this option is available Groups -User groups to which this option is available DayTimes 'Days and times this option is available
Select nodes
Select groups U
< r=<
Edit Menu Settings
Menu prompt-What will be displayed at the end of the menu
Prompt colour
Colour to display prompt in
Hilight colour )Colour to display hilighted characters in Suppress=Yes=Suppress all hard-coded CR/LF and colour change sequences
Global menu3No=Don't append global menu (GLOBALRA) to this menu
Prompt example
Hilight example
LANGUAGE.RA
Language
3No menu path for this language - using default path
Fail action Delete 1"Yes" means that files which fail will be deleted Unlisted <"Yes" means that files which fail will be marked as unlisted Notavail A"Yes" means that files which fail will be marked as not available Move to
Area to move failed files toU
Delete
Unlisted
/unavailable /move to
NoneU
Upload scanning
Scan online <Yes=scan uploads immediately, No=scan after user disconnects
Failed scan -Action to take on files which fail virus scan
Scan utility ;Full DRIVE AND PATH to activate external virus-scan utilityU
Archivers
Archive format definition+ Unpack command-line. FULL DRIVE AND PATH! ) Pack command-line. FULL DRIVE AND PATH! U
RAMGR ALT-function key manager
AEnter a DOS command-line, "@" will be replaced with the file nameU
File options
Upload credit ?Extra time (in seconds) users receive for every 1 upload minute
Payback credit NNumber of credits to give a user whenever one of his/her uploads is downloaded
Touch dates 4Set to Yes to set uploaded files to the current date
Show missing /Set to Yes to display entries for missing files
Upload space 5Minimum free space (in Kb) required to permit uploads
Logon.Newfiles (Show new files since last call at logon?
Newfiles.Tag 'Enable file tagging for Logon.Newfiles?
Download start !Hours to permit downloads (START)
Download end
Hours to permit downloads (END)
Download speed &Minimum speed required for downloading
No dupe ext :Ignore file extensions when checking for upload duplicates
DL description 8Allow users to download descriptions with file downloads
List format
File list display format
Missing format (File list display format (MISSING files)
Upload scan -Sub-menu to configure upload scanning options
RAMGR FnKeys %Configure the RAMGR Alt-Function keys
Ext arcview 4Command-line for an external archive viewing utility
Archivers .Command-lines for automatic archive conversion
Logoff warning 'Warn user about tagged files at logoff?
New CD areas 'Include CD-ROM areas in new files scan?
File list format
(F1) for colour map
Missing file list format
External archive viewer U
RemoteAccess CONFIG; 2.50 ( Copyright (C) 1996 Wantree Development
All Rights Reserved U
Flags
#8 1Press ENTER to toggle flag setting, ESC when doneU
u=@8u
B=`Tu
= gu
Command-line switches + RACONFIG Command-line switches: + -B Force black & white (monochrome) mode + -N No dupe msg/file area number checking + + -L Use the language manager directly + -M Use the menu editor directly U
About RemoteAccess " RemoteAccess 2.50 " Copyright 1996 " Wantree Development " " All Rights Reserved U